beautypg.com

1g/10 gbps ethernet phy ip core, 1g/10 gbps ethernet phy ip core -1 – Altera Transceiver PHY IP Core User Manual

Page 110

background image

1G/10 Gbps Ethernet PHY IP Core

5

2015.01.19

UG-01080

Subscribe

Send Feedback

The 1G/10 Gbps Ethernet PHY MegaCore

®

(1G/10GbE) function allows you to instantiate both the

Standard PCS and the higher performance 10G PCS and a PMA. The Standard PCS implements the 1

GbE protocol as defined in Clause 36 of the IEEE 802.3 2005 Standard and also supports auto-negotiation

as defined in Clause 37 of the IEEE 802.3 2005 Standard standard. The 10G PCS implements the 10 Gb

Ethernet protocol as defined in IEEE 802.3 2005 Standard.
You can switch dynamically between the 1G and 10G PCS using the Altera Transceiver Reconfiguration

Controller IP Core to reprogram the core. This Ethernet core targets 1G/10GbE applications including

network interfaces to 1G/10GbE dual speed SFP+ pluggable modules, 1G/10GbE 10GBASE-T copper

external PHY devices to drive CAT-6/7 shielded twisted pair cables, and chip-to-chip interfaces.
The following figure shows the top-level modules of the 1G/10GbE PHY IP Core. As this figure indicates,

the 1G/10 Gbps Ethernet PHY connects to a separately instantiated MAC. The 10G PCS receives and

transmits XGMII data. The Standard PCS receives and transmits GMII data. An Avalon Memory-Mapped

(Avalon-MM) slave interface provides access to PCS registers. the PMA receives and transmits serial data.

©

2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134