beautypg.com

Custom phy ip core, Custom phy ip core -1 – Altera Transceiver PHY IP Core User Manual

Page 214

background image

Custom PHY IP Core

9

2015.01.19

UG-01080

Subscribe

Send Feedback

The Altera Custom PHY IP Core is a generic PHY that you can customize for use in Arria V, Cyclone V,

or Stratix V FPGAs. You can connect your application’s MAC-layer logic to the Custom PHY to transmit

and receive data at rates of 0.611–6.5536 Gbps for Arria V GX devices, 0.611–10.3125 Gbps in Arria V GT

devices, 0.622–9.8304 Gbps in Arria V GZ devices, 0.611–3.125 Gbps for Cyclone V GX devices, 0.611–

5.000 Gbps for Cyclone V GT devices, and 0.622–11.0 Gbps for Stratix V devices. You can parameterize

the physical coding sublayer (PCS) to include the functions that your application requires.
The following functions are available:
• 8B/10B encode and decode

• Three word alignment modes

• Rate matching

• Byte ordering
By setting the appropriate options using the MegaWizard Plug-In Manager, you can configure the

Custom PHY IP Core to support many standard protocols, including all of the following protocols:
• Serial Data Converter (SDC(JESD204A))

• Serial digital interface (SDI)

• Ethernet (1.25 and 2.50 Gbps)

• Serial RapidIO

®

(SRIO) 1.3

• Serial ATA (SATA) and serial attached SCSI (SAS) Gen1, Gen2, and Gen3

• Gigabit-capable passive optical network (GPON)

©

2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134