Xcvr_tx_pre_emp_2nd_post_tap_user, Xcvr_tx_pre_emp_1st_post_tap, Xcvr_tx_pre_emp_2nd_post_tap – Altera Transceiver PHY IP Core User Manual
Page 642
Related Information
•
This solution provides the mapping of the Transceiver Toolkit pretap settings to the Quartus II
transceiver QSF assignment.
•
XCVR_TX_PRE_EMP_2ND_POST_TAP_USER
Pin Planner and Assignment Editor Name
Transmitter Preemphasis Second Post-Tap user
Description
Specifies the transmitter pre-emphasis second post-tap setting value, including inversion.
Options
0–31
Assign To
Pin - TX serial data
XCVR_TX_PRE_EMP_1ST_POST_TAP
Pin Planner and Assignment Editor Name
Transmitter pre-emphasis First Post-Tap
Description
Specifies the first post-tap setting value.
Note: This parameter must be set in conjunction with
XCVR_TX_VOD
,
XCVR_TX_PRE_EMP_2ND_POST_TAP
,
and
XCVR_TX_PRE_EMP_PRE_TAP
. All combinations of these settings are not legal. Refer to the
Stratix V Device Datasheet for more information.
Options
0–31
Assign To
Pin - TX serial data
Related Information
XCVR_TX_PRE_EMP_2ND_POST_TAP
Pin Planner and Assignment Editor Name
Transmitter pre-emphasis Second Post-Tap
19-48
XCVR_TX_PRE_EMP_2ND_POST_TAP_USER
UG-01080
2015.01.19
Altera Corporation
Analog Parameters Set Using QSF Assignments