Altera Transceiver PHY IP Core User Manual
Page 308
PMA Optional Ports
Table 12-7: RX PMA Parameters
The following table describes the optional ports you can include in your IP Core. The QPI interface implements
the Intel Quickpath Interconnect.
For more information about the CDR circuitry, refer to the Receiver Clock Data Recovery Unit section in Clock
Networks and PLLs in Stratix V Devices.
Parameter
Range
Description
Enable tx_pma_qpipullup
port (QPI)
On/Off
When you turn this option On, the core includes
tx_
pma_qpipullup
control input port. This port is only
used for QPI applications.
Enable tx_pma_qpipulldn
port (QPI)
On/Off
When you turn this option On, the core includes
tx_
pma_qpipulldn
control input port. This port is only
used for QPI applications.
Enable tx_pma_txdetectrx
port (QPI)
On/Off
When you turn this option On, the core includes
tx_
pma_txdetectrx
control input port. This port is only
used for QPI applications. The RX detect block in the
TX PMA detects the presence of a receiver at the
other end of the channel. After receiving a
tx_pma_
txdetectrx
request, the receiver detect block initiates
the detection process.
Enable tx_pma_rxfound port
(QPI)
/Off
When you turn this option On, the core includes
tx_
pma_rxfound
output status port. This port is only
used for QPI applications. The RX detect block in the
TX PMA detects the presence of a receiver at the
other end of the channel.
tx_pma_rxfound
indicates
the result of detection.
Enable rx_pma_qpipulldn
port (QPI)
On/Off
When you turn this option On, the core includes the
rx_pma_qpipulldn port. This port is only used for
QPI applications.
Enable rx_pma_clkout port
On/Off
When you turn this option On, the RX parallel clock
which is recovered from the serial received data is an
output of the PMA.
Enable rx_is_lockedtodata
port
On/Off
When you turn this option On, the
rx_is_lockedto-
data
port is an output of the PMA.
Enable rx_is_lockedtoref
port
On/Off
When you turn this option On, the
rx_is_
lockedtoref
port is an output of the PMA.
Enable rx_set_lockedtodata
and rx_set_locktoref ports
On/Off
When you turn this option On, the
rx_set_lockedt-
data
and rx_set_lockedtoref ports are outputs of the
PMA.
12-10
PMA Parameters for Stratix V Native PHY
UG-01080
2015.01.19
Altera Corporation
Stratix V Transceiver Native PHY IP Core