M-AUDIO Pro Tools Recording Studio - Manual (Page 912)

Pro Tools Reference Guide 894
4 On the control surface, do one of the follow-
ing:
• Turn the encoder or press the channel Se-
lect switch where you want to map the pa-
rameter.
– or –
• If the control surface is in Flip mode, move
the fader or press the channel Select switch
where you want to map the parameter.
5 Repeat steps 3-4 for each parameter you want
to map.
6 Take the plug-in out of Learn mode.
To change parameter mapping in a plug-in map:
1 Open the plug-in whose custom map you
want to change.
2 Choose the map you want to change from the
Map Preset pop-up menu.
3 Put the plug-in into Learn mode. The plug-in
is focused on the control surface.
4 Do the following for each parameter mapping
you want to change:
• In the plug-in window, click the new plug-
in parameter you want to map. The param-
eter name appears in the Parameter menu.
– and –
• On the control surface, page to the encoder
or switch where you want to change the
mapping, and turn the encoder or press the
switch.
5 Take the plug-in out of Learn mode.
To remove parameter mapping from a plug-in map:
1 Open the plug-in whose custom map you
want to change.
2 Choose the map you want to change from the
Map Preset pop-up menu.
3 Put the plug-in into Learn mode. The plug-in
is focused on the control surface.
4 Do the following for each parameter mapping
you want to remove:
• Make sure the Parameter menu displays No
Control .
– and –
• On the control surface, page to the encoder
or switch where you want to remove the
mapping, and turn the encoder or press the
switch.
5 Take the plug-in out of Learn mode.
Managing Plug-in Maps
You can save plug-in maps as presets for reuse
on the same Pro Tools system, or export them
for use on other Pro Tools systems with a similar
control surface.
Saving Plug-in Maps
Plug-in maps are saved as global preferences on
a Pro Tools system, so they are available to all
sessions created on the system.
When you create a map for a plug-in, that map
becomes available to all other plug-ins of the
same type and channel format.
To save a copy of a custom plug-in map:
1 Open the plug-in whose map you want to
copy.
2 Choose the map you want to copy from the
Map Presets pop-up menu.
If you want to map the same plug-in in dif-
ferent channel formats (such as mono, ste-
reo and 5.1 surround) you need to create a
separate plug-in map for each format.