M-AUDIO Pro Tools Recording Studio - Manual (Page 907)

Chapter 41: Plug-in and Hardware Inserts 889
To change plug-in presets using the +/– buttons:
„
Click the Plus (+) or Minus (–) buttons to se-
lect the next or previous preset. The next (or pre-
vious) preset is enabled, and the Plug-in
Librarian menu changes to show the name of
the new preset.
Editing Settings on Unlinked Multi-
Mono Plug-ins
When a multi-mono plug-in is unlinked, im-
porting, copying, pasting, or bypassing settings
affects only the currently selected channel.
Plug-in Settings Dialog
The Plug-in Settings dialog lists the presets for
the current plug-in type. From this list, you can
audition and select presets.
Use the Folder pop-up menu at the top of the
Plug-in Settings dialog to switch between plug-
in settings subfolders, or root and session set-
tings folders.
The Plug-in Settings dialog includes the follow-
ing:
Folder This pop-up menu lets you switch be-
tween presets located in root or session folders
(and any available subfolders).
Patch Field This field displays the name of the
active (highlighted) preset.
Increment Patch Every X Sec This option lets
you audition plug-in presets in series by auto-
matically scrolling through them for a specified
number of seconds.
To change plug-in presets using the Plug-in
Settings dialog:
1 Click the Settings Select button.
2 Do one of the following:
• Select a preset from the dialog list.
– or –
• Use the Arrow keys to scroll through the
available presets.
3 Click Done.
Auditioning Plug-in Presets
When the Plug-in Settings dialog is open, you
can have Pro Tools automatically scroll through
and audition the plug-in settings files saved in
the plug-in’s root settings folder or in the cur-
rent session’s settings folder.
To audition plug-in presets:
1 Click the Settings Select button.
2 From the dialog list, click a preset—the start-
ing point from which you will scroll through
the settings files.
You will lose the current plug-in settings if
they are not saved before you use the Next
and Previous Setting buttons. Always save
your plug-in settings to the selected Root
Settings folder.
Plug-in Settings dialog
To switch between plug-in settings subfold-
ers, press Control (Windows) or Command
(Mac) and use the Up/Down Arrow keys.