M-AUDIO Pro Tools Recording Studio - Manual (Page 124)

Pro Tools Reference Guide 106
Send To
The Send To setting lets you select the MIDI Out
port to which your MIDI controller is con-
nected.
Number of Channels
The Number of Channels (# Ch’s) setting dis-
plays the number of control channels supported
by the selected MIDI controller type.
Ethernet Controllers
The Ethernet Controllers page lets you configure
up to seven different Ethernet controllers for
Pro Tools.
Enable
When selected, Pro Tools is enabled for control
by one or more Ethernet controllers (such as
D-Command or C|24).
Ethernet Port
The Ethernet Port setting lets you specify the eth-
ernet port on your computer to which your con-
troller is connected.
Number and Color
The number of the row indicates the order of the
selected controllers. The color corresponds to
the colored controller focus border around
Pro Tools track and plug-in controls.
Ethernet Controller
From the Ethernet Controller pop-up menu, se-
lect the Ethernet controller that you want to
use.
Name
Click the Name button to enter a name for the
selected Ethernet controller.
Mic Preamps
(Pro Tools HD Only)
The Mic Preamps page lets you configure up to
nine different Mic Preamps (Digidesign PRE) for
Pro Tools.
For information about the Digidesign PRE,
see the PRE Guide.