M-AUDIO Pro Tools Recording Studio - Manual (Page 559)

Chapter 27: Playlists 541
Matching Criteria
The Matching Criteria window lets you select
the criteria for matching alternate regions. This
lets you refine the list of available matching re-
gions in the Alternate Takes pop-up menu and
Region Right-click Matches submenu.
To configure the Matching Criteria options for
matching alternate regions:
1 Do one of the following:
• Right-click the region with the Selector or
the Grabber tool and select Matches >
Match Criteria
.
– or –
• With the Selector tool, Control-click (Win-
dows) or Command-click (Mac) at the pre-
cise beginning of the loop or punch range
and select Match Criteria.
2 In the Matching Criteria window, select any
combination of the following Alternates Match
options:
• Track ID
• Track Name
• Region Rating
3 Select one of the following In Addition To op-
tions:
• All
• Region Start
• Region Start and End
• Within Selection
• None
4 Leave the Matching Criteria window open to
change the settings as appropriate while com-
positing tracks. Close the Matching Criteria win-
dow when you are done.
Alternates Match Options
The following Alternates Match options can be
selected in any combination:
Track ID Any regions recorded to the same track
are considered matching. Use this option for se-
lecting alternate takes from loop or punch re-
cording.
Track Name Any regions that share the same
root name with the track or playlist are consid-
ered matching. For example, the Matches for a
track named “Gtr.L” would show the regions
“Gtr.L_01” and “Gtr.L_02-01,” but not “Gui-
tar.L_01.”
Region Rating Any regions that have the same
Rating are considered matching. Enable this op-
tion if you have rated regions (see “Rating Re-
gions” on page 509).
Matching Criteria window
Matching Criteria affects MIDI as well as
audio regions.
Matching Criteria settings are saved with
your Pro Tools session.