Apple Motion 4 - Manual (Page 993)

This filter causes rasterization in 3D groups.
Original image Basic 3D applied
Parameters in the Inspector
X Rotation: Sets the amount, in degrees, that the object is rotated along the X axis.
Y Rotation: Sets the amount, in degrees, that the object is rotated along the Y axis.
Z Rotation: Sets the amount, in degrees, that the object is rotated along the Z axis.
Distance: Sets the distance the object is pushed away from the Canvas.
Perspective: Sets the amount of perspective shift placed on the object.
Back Face: An image well to which you can drag an object to use as the “back” side of
a rotated object.
Back Face Style: A pop-up menu that contains fit and display options for the object in
the Back Face image well:
• Center: Positions the object in the Back Face image well in the center of the rotated
object.
• Stretch: Stretches the object in the Back Face image well to the size of the rotated
object.
• Transparent: Hides the object in the Back Face image well.
• Mix: Sets what percentage of the original image is blended with the distorted image.
HUD Controls
None.
Black Hole
This filter distorts an image by causing part of it to disappear into the specified center
point, and by bowing the top, bottom, and sides inward. As the value of the Amount
parameter increases, the more the sides bow in, and the more of the image at the center
point disappears into it. The
Poke filter has a similar effect without removing part of the
image.
993 Chapter 16 Using Filters