Apple Motion 4 - Manual (Page 989)

Parameters in the Inspector
Noisiness: Sets the amount of noise to introduce into the object.
Movement: Sets whether or not to animate the noise in the image.
Mix: Sets the amount of the original image to mix with the color-corrected image.
HUD Controls
The HUD contains the following control: Noisiness.
Saturate
Increases or decreases the amount of color in an image by a specified amount. This filter
can be used to mute the color in an image, making brighter colors less saturated. It can
also be used to completely eliminate the color from an image, turning a color image to
a grayscale one.
This filter causes rasterization in 3D groups.
Original image Saturate filter applied
Parameters in the Inspector
Saturation: Sets the color saturation of the object, ranging from –1.0 (no color information)
to 0.0 (unadjusted color) to 3.0.
Mix: Sets what percentage of the original image is blended with the color-corrected
image.
HUD Controls
The HUD contains the following control: Saturation.
Sepia
Tints an object with a sepia tone. The black and white points are remapped to dark and
light sepia colors. The amount of tinting can be adjusted, to achieve either a subtle mix
of the original and tinted colors, or a completely tinted image.
989 Chapter 16 Using Filters