Apple Motion 4 - Manual (Page 981)

Match Color 4: Picks the color of the fourth selection color for reduction. This parameter
is used only if Reduce To is set to 4 Colors.
Replace With: Picks the color that is substituted for the selection determined by Color 4.
This parameter is used only if Reduce To is set to 4 Colors.
Mix: Sets what percentage of the original image is blended with the color-corrected
image.
HUD Controls
The HUD contains the following controls: Smoothness, Reduce To, Match Color 1, Replace
With, Match Color 2, Replace With, Match Color 3, Replace With, Match Color 4, and Replace
With.
Colorize
Substitutes the blacks and whites in an image with different colors you select. All other
colors in the image are remapped to a duochrome range that falls between these two
colors.
Interesting colorized “negative” effects can be achieved by remapping the blacks in an
image to a lighter color than the whites.
Original image Colorize with defaults
Parameters in the Inspector
Remap Black To: Sets the color that is mapped to black. The color controls can be
expanded with the disclosure triangle to include Red, Green, Blue, and Opacity sliders to
more precisely select the color.
Remap White To: Sets the color that is mapped to white. The color controls can be
expanded with the disclosure triangle to include Red, Green, Blue, and Opacity sliders to
more precisely select the color.
Intensity: Sets the strength of the colorization. Values range from 0 (no colorization) to
1.00.
Mix: Sets the percentage at which the original image is blended with the color-corrected
image.
981 Chapter 16 Using Filters