Apple Motion 4 - Manual (Page 746)

2 Set the values for the added parameters. In this example, the Scale parameter is added
and the Scale value set to 200%.
Sequence behavior applied to replicator with
Scale parameter set to 200%, Sequencing set to
Through, and Spread set to 4
For more information on adding parameters to the Sequence Replicator behavior, see
Adding Parameters to the Sequence Replicator Behavior .
3 Choose Custom from the Traversal pop-up menu.
The Location parameter becomes available.
When Traversal is set to
Custom, the Location
parameter becomes
available. Use the
Location slider to
keyframe how the
sequence moves through
the replicator pattern.
4 Enable Record (press A).
5 At the frame where you want to begin the animation, drag the Location slider (or use the
adjacent value slider) to set where the sequence begins.
As you drag the slider, the sequence moves through the pattern elements. Values displayed
in the Location parameter specify where in the pattern the sequence is (in percentage
points)—0 representing the origin of the pattern, and 100% representing the end of the
pattern.
In the Inspector, a keyframe is added to the Location parameter.
6 Go to the next frame where you want to set a keyframe, and move the Location slider.
7 Repeat step 6 until you have created all of your keyframes.
8 Play the project (press the Space bar).
746 Chapter 12 Using the Replicator