Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 963)

Brocade Network Advisor SAN + IP User Manual 909
53-1002949-01
Steps for connecting to a KMIP-compliant SafeNet KeySecure
25
Creating a cluster
1. From the KeySecure Management Console, select the Device tab, then select Device
Configuration > Cluster.
The Cluster Configuration page displays. (Refer to Figure 335 .)
FIGURE 335 KeySecure Cluster Configuration page
2. Under Create Cluster, enter a user-defined password in the fields provided, then click Create.
The Cluster Configuration page refreshes; the new cluster information is listed in the Cluster
Members table. (Refer to
Figure 336 .)
3. Verify the cluster status is shown as Active.