Bottlenecked ports widget – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 349
![background image](/manuals/361714/349/background.png)
284
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Status widgets
8
Accessing additional data from the Access Point Status widget
Double-click a section in the Access Point Status widget to navigate to a filtered view of the AP
Products report.
Bottlenecked Ports widget
The Bottlenecked Ports widget (
) displays the bottlenecked port violations for the
specified fabric and time range in a table. There are four bottlenecked port widgets: All, ISL,
Initiator, and Target.
FIGURE 102
Bottlenecked Ports widget
The Bottlenecked Ports widget includes the following data:
•
Severity icon/violation count/widget title — The color of the worst severity and the total number
of ports in violation displays before the widget title.
•
Port — The port identifier, such as port name, number, address, WWN, user port number, or
zone alias.
•
Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
-
Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
-
Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
-
Target — The target port on the connected device. Click to launch the device properties
dialog box.
•
Violation Count — The number of bottleneck violations for the port during the selected time
range. This is based on bottleneck configuration. Each trap or alert sent by the switch and the
Management application counts as one violation. For more information, refer to
•
Product — The product label, such as product name, IP address, node WWN, domain ID, or
zone alias.