Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 250)

184 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Name settings
6
Fixing duplicate names
To fix duplicated names, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays.
2. Click Fix Duplicates.
The Duplicated Names dialog box displays ( Figure 67 ).
FIGURE 67 Duplicated Names dialog box
The Duplicated Names dialog box contains the following information:
• Description — A description of the device.
• Duplicate Names table — Every instance of duplicate names.

Fabric — The fabric name.

FC Address — The Fibre Channel address.

Names — The current name of the device.
If you selected the Append Incremental numbers for all repetitive names option, the
names display with the incremental numbering.
If you selected the I will fix them myself option, this field becomes editable.

Operational Status — The operational status of the device. There are four possible
values:
-
Up — Operation is normal.
- Down — The port is down or the route to the remote destination is disabled.
- Disabled — The connection has been manually disabled.
- Backup Active — The backup TCP port is active due to a failover.

Port # — The port number.

Type — The type of device.