Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1291)

1240 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Configuration snapshots
32
Searching the configuration snaphots
The Search Pre/Post Snapshots dialog box allows searching for products that have a particular
snapshot in the management server’s repository. Use the search feature to refine the snapshot
repository based on the filter criteria described in this section.
1. Click the IP tab.
2. Select Configure > Configuration > Configuration Repository.
3. Click the Configuration Snapshots tab.
4. Click the Search button.
The Search Pre/Post Snapshots dialog box, as shown in Figure 533 , displays.
FIGURE 533 Search Pre/Post Snapshots dialog box
5. Select a product from the Available Products list and click the right arrow button to move one or
more products to the Selected Products list.
Press Ctrl or Shift and then click each product to select more than one product.
6. Enter a search text string, with a limit of 255 characters, into the Containing Text field. This text
string is used to search on snapshots of the selected products.
Press Ctrl or Shift and then click each product to select more than one product.
7. Enable the following options, as required: