Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 387)

322 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Performance monitors
8
Top Port Traffic monitor
The Top Port Traffic monitor ( Figure 122 ) displays the top ports with receive and transmit traffic in a
table.
FIGURE 122 Top Port Traffic monitor
The Top Port Traffic monitor includes the following data:
• Severity icon/monitor title — Displays the worst severity of the data shown next to the monitor
title.
• Port — The port affected by this monitor.
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.
• RX Traffic (MB/s) — The top receive traffic in megabits per second.
• TX Traffic (MB/s) — The top transmit traffic in megabits per second.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
“Editing a preconfigured performance monitor” on page 332.