Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2016)

1976 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
IP device properties
E
3. Click Close to close the Properties dialog box.
IP device properties
You can view device and port properties from any view in the IP Topology.
You can customize the device and fabric Properties dialog boxes to display only the data you need
by creating user-defined property labels (refer to
“Adding a property field” on page 1991).
You can also edit property fields to change information. Fields containing a green triangle ( ) in
the lower right corner are editable.
Viewing IP device and port properties
To view properties for a device, complete the following steps.
1. Select one of the following view types from the view list on the Product List toolbar.
• Network Object
• IP Topology
• L2 Topology
• Ethernet Fabrics (refer to “Viewing VCS fabric properties” on page 1980)
• VLAN Topology
2. Right-click the device in the Product List and select Properties.
The Device_Name Properties dialog box displays.
3. Review the device and port properties.
To add user-defined property labels, refer to “Adding a property field” on page 1991.
Fields containing a green triangle ( ) in the lower right corner are editable.
NOTE
Some fields are not available for all products.
TABLE 220 NPIV WWNs tab
Field Description
NPIV Port WWN The world wide name of the NPIF port.
NPIV Node WWN The world wide name of the NPIF node.
Name The user-defined name of the NPIV WWN. This is an editable field.
Uplink Port Number The port number of the uplink.
Uplink Port WWN The port world wide name of the uplink.
Server Profile The server profile.
Server Bay The server bay number.
Virtual Serial Number The serial number.