Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1390)

Brocade Network Advisor SAN + IP User Manual 1341
53-1002949-01
LSP
37
Editing an RSVP LSP
You can edit an RSVP LSP by taking the following steps.
1. Select Configure > MPLS > LSP.
2. Select the RSVP LSP tab.
3. Select the RSVP LSP you want to edit.
4. Click the Edit button.
The RSVP LSP Configuration dialog box of the RSVP LSP Configuration wizard displays
(
Figure 574 ). Refer to “Configuring advanced RSVP LSP settings” for a description of how to
use the RSVP LSP Configuration wizard.
Duplicating an RSVP LSP
When you want to add a new RSVP LSP, you can save work by duplicating an existing RSVP LSP and
editing the name and any other parameters you may want to change. You can duplicate an RSVP
LSP by taking the following steps.
1. Select Configure > MPLS > LSP.
2. Select the RSVP LSP tab.
3. Select the RSVP LSP you want to duplicate.
4. Click the Duplicate button.
The RSVP LSP Configuration dialog box of the RSVP LSP Configuration wizard displays
(
Figure 574 ). Name field contains the name of the duplicated RSVP LSP with _Copy appended.
Refer to “Configuring advanced RSVP LSP settings” for a description of how to use the RSVP
LSP Configuration wizard.
Deleting an RSVP LSP
You can delete an RSVP LSP by taking the following steps.
1. Select Configure > MPLS > LSP.
2. Select the RSVP LSP tab.
3. Select the RSVP LSP you want to delete.
4. Click the Delete button.
The Delete RSVP LSP Configuration wizard displays ( Figure 581 ).