Disabling connection utilization, Figure 648 – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 1549
1502
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
SAN connection utilization
43
FIGURE 648
Historical Data Collection message
2. Choose one of the following options:
•
Select Enable SAN Wide to enable data collection for the entire SAN.
•
Select Enable Selected Fabrics to enable data collection for specific fabrics.
The Historical Data Collection dialog box displays. To select the fabrics on which you want
to enable data collection, refer to
“Enabling historical performance collection for selected
If you click Close on the Historical Data Collection message, Historical Data Collection is
not enabled; however, the Utilization Legend still displays in the main window.
There is a 5-minute delay before the values are displayed.
Disabling connection utilization
To turn off the connection utilization, choose one of the following options while connection
utilization is enabled:
•
Select Monitor > Performance > View Utilization.
•
Press CTRL + U.
•
Click the Utilization icon (
).
The Utilization Legend is removed from the main interface window.