Ftp/scp/sftp server settings – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 289
Brocade Network Advisor SAN + IP User Manual
223
53-1002949-01
Software Configuration
6
3. To connect to products using SSH, complete the following steps.
a. Select the SSH only option.
b. Enter the connection port number in the SSH Port field. Go to
The default SSH port number is 22.
4. To connect to products using Telnet, select the Telnet only option. Go to
.
5. To connect to products using SSH then Telnet, complete the following steps.
a. Select the SSH then Telnet option.
b. Enter the connection port number in the SSH Port field. Continue with
6. Select one of the following options to determine configuration file transfer communication:
•
SCP only
•
TFTP only
•
SCP then TFTP
•
TFTP then SCP
7. Select one of the following options to configure the web element manager communication:
•
HTTP
•
HTTPS (HTTP over SSL)
•
HTTPS then HTTP
8. Click Apply or OK to save your work.
FTP/SCP/SFTP server settings
NOTE
For FIPS-enabled Fabric OS switches, you must configure the FTP/SCP/SFTP server communication
to an external SCP server to download firmware and allow technical support.
File Transfer Protocol (FTP) is a network protocol used to transfer data from one computer to
another over a TCP computer network. During installation, a built-in FTP server and its services are
installed. Other FTP servers on your system are recognized by the application as external FTP
servers.
For Windows systems, the built-in FTP server is the default configuration and installation starts the
FTP service if port 21 is not used by any other FTP server. For UNIX systems, built-in FTP is the
default for UNIX systems during installation; the external FTP server is the default only if port 21 is
busy.
Note that when uninstalling the application the built-in FTP server is removed with all other services
even if the FTP service is used by firmware upgrade or supportSave features.
NOTE
FTP is supported on all Fabric OS devices.
Secure Copy (SCP) is a means of securely transferring computer files between a local and a remote
host or between two remote hosts, using the Secure Shell (SSH) protocol. You must configure SCP
on your machine to support Technical Support and firmware download.