Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 679)

Brocade Network Advisor SAN + IP User Manual 621
53-1002949-01
Logical chassis cluster operations
18
FIGURE 216 Discover Setup - IP dialog box before removal of node
Figure 217 shows the Discover Setup - IP dialog box after the administrator has removed the node
with the IP address of 172.26.5.130 from its logical chassis cluster.
FIGURE 217 Discover Setup - IP dialog box after disabling the node from logical chassis cluster
Figure 218 shows the Discover Setup - IP dialog box after The Management application has
performed rediscovery. The node with the IP address of 172.26.5.130 is shown as a degraded link.
FIGURE 218 Discover Setup - IP dialog box after rediscovery
How the Management application handles a cluster mode change
In Network OS release 4.0, an administrator can change the mode of a cluster from fabric cluster
mode to logical chassis cluster mode, and vice versa. For instructions, refer to the Network OS
Administrator’s Guide and the Network OS Command Reference.
NOTE
All cluster-specific configurations are lost during a cluster-mode change.
On refresh collection, the Management application detects the mode change and retains all
database entries related to the cluster.