Viewing product group properties – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 225
158
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Product group overview
5
•
Description — The description of the product.
•
User_defined_property1 (up to 3) — A user-defined product property value. You can create up
to 3 user-defined properties (refer to
Viewing product group properties
To view group properties, complete the following steps.
1. Select Network Objects from the view list on the Product List toolbar.
2. Right-click the product group you want to view properties for in the Product List and select
Properties.
The Product Group Properties dialog box displays.
3. Review the information:
TABLE 28
Field/Component
Description
Properties tab
Select to display information about the group.
Name
The unique name (maximum 64 characters) for the product group.
Description
The description (maximum 255 characters) for the product group.
Creator
The user name of the creator (for example, Administrator).
Topology Display
Whether or not topology display is enabled.
Dynamic Group
Whether or not this is a dynamic group.
Products tab
Select to display information about products in the group.
Product Count
The number of products in the group.
Performance list
Select to launch the real time or historical performance.
Name
The name of the product.
Alias
The alias.
Host Name
The host name.
System Name
The system name.
IP Address
The IP address (IPv4 or IPv6 format) of the product.
System OID
The system's object identifier.
Device Type
The type of device.
Serial #
The serial number of the product.
Status
The status for the product and the port.
Admin Status.
The admin status of the product. Options include:
Normal mode
Troubleshooting mode
Memo
Additional information about the product.
Vendor
The name of the product’s vendor.
Model
The model number of the product.
Port Count
The number of ports on the product.