Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1017)

Brocade Network Advisor SAN + IP User Manual 963
53-1002949-01
Adding a switch to an encryption group
25
The Configuration Status dialog box displays. (Refer to Figure 400 .)
FIGURE 400 Configuration Status dialog box
All configuration items have green check marks if the configuration is successful. A red stop
sign indicates a failed step. A message displays below the table, indicating the encryption
switch was added to the group you named, and the public key certificate is stored in the
location you specified.
7. Review important messages, then click Next.
The Error Instructions dialog box displays. (Refer to Figure 401 .) Instructions for installing
public key certificates for the encryption switch are displayed. These instructions are specific
to the key vault type.