Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 710)

652 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Adapter software
19
Deleting a driver file from the repository
1. Select one or more driver files from the Available Driver Files list on the Driver Repository
dialog box.
2. Click Delete.
The driver file is removed from the Driver Repository dialog box.
NOTE
Windows drivers (.exe files) cannot be imported into the server repository when the
Management application server is running on Linux or Solaris platforms.
Boot image repository
The boot code image stored in the adapter’s flash memory contains the instructions that enable
the server to locate the boot disk in SAN. The boot code image contains the basic input/output
system (BIOS), extensible firmware interface (EFI), and open firmware which enable the adapters to
be compatible with any system platform.
Importing a boot image into the repository
Boot images are required for adapters that are shipped without a boot image or when it is
necessary to overwrite images on adapters that contain older or corrupted boot image versions.
1. From the Management application menu bar, select Configure > Host > Adapter Software.
2. Click the Boot Image tab.
The Boot Image Management dialog box, shown in Figure 231 , displays.
FIGURE 231 Boot Image Management dialog box