Table 23, Mib support – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 138
Brocade Network Advisor SAN + IP User Manual
71
53-1002949-01
IP discovery overview
4
MIB support
IP discovery requires SNMP management information base (MIB) support on the device for
management information collection. For a list of required MIBs, refer to
on page 71 or
TABLE 23
Required MIB support for IronWare OS devices
IETF standard
MIB name
Required MIB object
Data collected
N/A
Brocade MIB
IEEE 802.1AB
LLDP-MIB
lldpObjects.lldpRemoteSystemsData For Layer 2 topology information:
Entire lldpObjects.lldpRemoteSystemsData
RFC 1213
MIB-II
mib-2.system
mib-2.interfaces.ifTable
mib-2.ip.ipAddrTable
From mib-2.interfaces.ifTable for interface
level information:
•
ifName/ifDescr
•
ifAlias
•
ifType
•
ifMtu
•
ifSpeed
•
ifPhysAddress
•
ifAdminStatus
•
ifOperStatus
•
ifLastChange
From mib-2.ip.ipAddrTable for IP subnet
information:
•
ipAdEntAddr
•
ipAdEntNetMask
From mib-2.ip.ipAddrTable for Layer 3
topology information:
•
ipForwarding
RFC 2465
IPv6-MIB
ipv6MIBObjects
ipv6NetToMediaTable
ipv6MIBObjects.ipv6AddrTable
From ipv6MIBObjects and
ipv6NetToMediaTable for interface level
information:
•
ifName/ifDescr
•
ifAlias
•
ifType
•
ifMtu
•
ifSpeed
•
ifPhysAddress
•
ifAdminStatus
•
ifOperStatus
•
ifLastChange
From ipv6MIBObjects.ipv6AddrTable for IP
subnet information:
•
ipv6AddrAddress
•
ipv6AddrPfxLength