Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 2252
Brocade Network Advisor SAN + IP User Manual
2215
53-1002949-01
Database tables and fields
I
MAX_FCIP_TUNNELS
The maximun number of tunnels that can be created
in this switch,-1 means not supported.
Default value is -1.
int
MAX_FCIP_CIRCUITS
The maximun number of circuits that can be created
in this switch, -1 means not supported.
Default value is -1.
int
FCIP_LICENSED
FCIP Advanced Extension Licensing is available. 1
means licensed and 0 means not licensed, -1 means
not supported.
Default value is -1.
smallint
ADDRESSING_MODE
This column to represent the logical switch
addressing modes to assign Port Addresses, There
are three different addressing modes supported.
Fixed (0), Flat or 10 bit (1), Dynamic (2).
Default value is -1.
smallint
PREVIOUS_STATE
This fields copies the old state of the switch . The
field could be used to track the state change
information for the switch.These values to be
populated by FCS during Fabric Refresh task.SMIA
requested this information but could be used by any
module which needs to track the state change
varchar
32
MANAGED_ELEMENT_ID
A unique managed element ID for this virtual switch.
Also a foreign key reference to the
MANAGED_ELEMENT table.
int
HIF_ENABLED
The HIF Enabled bit on the switch. Values are 1 for
enabled and 0 for not enabled. -1 the default, stands
for not supported and will be used for older
firmwares.
Default value is -1.
smallint
CLUSTER_MODE
This column is used to determine whether VCS
Cluster is in Standalone mode or Cluster mode. The
values will be populated by the VCS collector during
the discovery of the VCS switch. The default value of
-1 means that its a non VCS device. Following Enum
will be defined as NON_VCS(-1), STANDALONE(0),
CLUSTER(1).
smallint
VCS_ID
This column is used to store the VCS ID of the device.
The value will be populated by the
NosSwitchAssetCollector during the discovery of the
VCS Cluster. The non zero value will be stored as VCS
ID. Default value is -1.
smallint
TABLE 474
VIRTUAL_SWITCH (Continued)
Field
Definition
Format
Size