Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1660)

1614 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Flow parameter and configuration rules and limitations
44
Flow Mirror supported flow identification parameter combinations
Table 157 lists the supported flow parameter combinations for Flow Mirror.
Flow Monitor supported flow parameter combinations
Table 158 lists the supported flow parameter combinations for Flow Monitor.
NOTE
In the following combinations, an asterisk (*) is also supported as source and destination device
values for learning flows only on 16 Gbps-capable Fibre Channel platforms.
TABLE 157 Advanced Flow ID parameter combinations for Flow Mirror
Source
Device Destination
Device Ingress Port Egress Port Bidirectional LUN IDs Frame Type Description/ Notes
Fixed value,
Not specified,
or Any (*) Fixed value,
Not specified,
or Any (*) Not specified Fixed value Not specified Fixed value or
Not specified Fixed value Frame Type and
Bidirectional cannot be
supported together
Fixed value,
Not specified,
or Any (*) Fixed value,
Not specified,
or Any (*) Not specified Fixed value Fixed value or
Not specified Fixed value or
Not specified Not specified At least one frame
parameter should be
specified in the flow.
Fixed value,
Not specified,
or Any (*) Fixed value,
Not specified
or Any (*) Fixed value Not specified Fixed value or
Not specified
Fixed value or
Not specified Not specified Ingress port and Frame
Type cannot be supported
together
TABLE 158 Flow parameter combinations for Flow Monitor
Source
Device Destination
Device Ingress Port Egress Port LUN IDs Frame Type Bidirectional Description/ Notes
Fixed value or
Not specified Fixed value or
Not specified Fixed value Not specified Not specified Not specified Fixed value Bidirectional is not
supported with LUN IDs or
Frame Type values
Fixed value or
Not specified Fixed value or
Not specified Not specified Fixed value Not specified Not specified Fixed value
Fixed value or
Not specified Fixed value or
Not specified Fixed value Not specified Fixed value or
Not specified
Fixed value Not specified Ingress port is only
available on 16
Gbps-capable Fibre
Channel platforms.
Frame Type is supported
without source device or
destination device values.
Fixed value or
Not specified Fixed value or
Not specified Not specified Fixed value Fixed value or
Not specified Fixed value Not specified Frame Type is supported
without using source
device or destination
device