Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 688)

630 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Port profiles
18
Comparing port profiles
To summarize differences between the original port profiles and profiles on other switches,
complete the following steps.
NOTE
A MAC address can be associated with only one profile at a time.
1. Select a VCS-capable switch from the device tree.
2. Right-click and select Properties.
The Fabric Properties dialog box displays.
3. Click the Port Profiles tab.
4. In the Selected Profile Details area, click the Associated MACs tab.
If the associated MAC address is not selected, the MAC Match button is disabled under the
Profile Comparison Summary dialog box.
5. Click Compare.
The Profile Comparison Summary dialog box displays, as shown in Figure 223 .
NOTE
A green circle icon in the comparison summary indicates a complete match to the MAC
address on the target switch; a yellow triangle icon indicates a partial match.
FIGURE 223 Profile Comparison Summary dialog box