Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 1015
Brocade Network Advisor SAN + IP User Manual
961
53-1002949-01
Adding a switch to an encryption group
25
4. For this procedure, select Add this switch to an existing encryption group, then click Next.
The Add Switch to Existing Encryption Group dialog box displays. (Refer to
Figure 397
.)
The dialog box contains the following information:
•
Encryption Groups table: Enables you to select an encryption group in which to add a
switch.
•
Member Switches table: Lists the switches in the selected encryption group.
NOTE
If you are creating a new encryption group, refer to
“Creating a new encryption group”
FIGURE 397
Add Switch to Existing Encryption Group dialog box
5. Select the group in which to add the switch, then click Next.
The Specify Public Key Certificate (KAC) File Name dialog box displays. (Refer to
Figure 398
.)