Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1826)

Brocade Network Advisor SAN + IP User Manual 1785
53-1002949-01
MAPS interoperability with other features
50
Enabling MAPS on a device
You can enable MAPS on one or more devices at the same time. Enabling MAPS on a device
converts existing Fabric Watch thresholds to MAPS policies and the active thresholds currently
monitored by Fabric Watch will continue to be monitored through MAPS.
1. Select Monitor > Fabric Vision > MAPS > Enable.
The Enable MAPS dialog box displays ( Figure 771 ).
FIGURE 771 Enable MAPS dialog box
Select one or more devices on which you want to enable MAPS in the Available Switches list.
2. Click the right arrow button to move the selected devices to the Selected Switches list.
Remove switches from the Selected Switches list by selecting them and clicking the left arrow
button.
3. Click OK on the Enable MAPS dialog box.
A confirmation message displays.
4. Click Yes on the confirmation message to commit the changes to the selected devices.
MAPS interoperability with other features
Virtual Fabrics
MAPS is a logical switch-specific feature. Different logical switches can have different MAPS
configurations for the needs of the specific logical switch.
When you enable MAPS on the Virtual Fabric-enabled switch, MAPS is enabled, with the same
active policy, on all Fabric Identifiers (FIDs).