Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2054)

Brocade Network Advisor SAN + IP User Manual 2015
53-1002949-01
CLI Templates
G
TABLE 91 Network OS VLAN – Disable Native VLAN Configuration
Feature Description CLI Commands
VLAN To disable native VLAN from a trunk
interface. interface tengigabitethernet $
no switchport trunk native-vlan $
TABLE 92 Network OS VLAN – Access Interface Configuration
Feature Description CLI Commands
VLAN To configure the interface as an
access interface. interface tengigabitethernet $
switchport
switchport mode access
switchport access vlan $
TABLE 93 Network OS VLAN – Disable Access Interface Configuration
Feature Description CLI Commands
VLAN To disable the access interface. interface tengigabitethernet $
no switchport access vlan $
TABLE 94 Network OS VLAN – Enable Spanning Tree Protocol on NOS VLAN
Feature Description CLI Commands
VLAN To enable spanning tree protocol on
VLAN for Network OS 4.0. interface vlan $
no spanning-tree shutdown
! To enable spanning tree protocol on VLAN for NOS 3.0.
interface vlan $
no shutdown
TABLE 95 Network OS VLAN – Disable Spanning Tree Protocol on Network OS VLAN
Feature Description CLI Commands
VLAN To disable spanning tree protocol on
VLAN for Network OS version 4.0
and later. interface vlan $
spanning-tree shutdown
To disable spanning tree protocol on
VLAN for Network OS greater than or
equal to (>=) version 3.0 and less
than (<) version 4.0 . interface vlan $
shutdown