Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 691)

Brocade Network Advisor SAN + IP User Manual 633
53-1002949-01
System Monitor support on Network OS VDX platforms
18
FIGURE 224 Deploy Port Profiles to Products dialog box
5. Select an available target from the Available Targets list and click the right arrow button to
move the target selected for configuration deployment to the Selected Targets list.
NOTE
If a fabric is selected and moved in a VCS fabric, all members are moved to the Selected
Targets list. Individual members of a VCS fabric can be added and removed from the Selected
Targets list.
6. Click OK.
The Deployment Status dialog box displays.
7. Click Start on the Deployment Status dialog box to save the changes to the selected devices.
8. Click Close to close the Deployment Status dialog box.
System Monitor support on Network OS VDX platforms
System Monitor supports the Network OS VDX switches shown in Table 79 . The following System
Monitor features are supported on Network OS VDX platforms:
• FRU monitoring
• System thresholds
• Alert notifications
• Resource monitoring
• SFP monitoring
• Security monitoring
• Port statistics monitoring
Refer to the Network OS Administrator’s Guide and Network OS Command Reference for
configuration information.