Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1280)

Brocade Network Advisor SAN + IP User Manual 1229
53-1002949-01
Configuration repository
32
• Startup
• Startup and Reload
6. Review the status details for accuracy.
Searching the configuration repository
The Search Configuration Repository dialog box allows searching for products that have a particular
configuration in the management server’s repository. Use the search feature to refine the
configuration repository based on the filter criteria described in this section.
1. Click the IP tab.
2. Select Configure > Configuration > Configuration Repository.
3. Click the Product Configurations tab.
The Configuration Repository dialog box displays.
4. Click the Search button.
The Search Configuration Repository dialog box, as shown in Figure 527 , displays.
FIGURE 527 Search Configuration Repository dialog box
5. Select a product from the Available Products list and click the right arrow button to move one or
more products to the Selected Products list.
Press Ctrl or Shift and then click each product to select more than one product.
6. Enter a search text string, with a limit of 255 characters, into the Containing Text field. This text
string is used to search on configurations of the selected products.