Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 198)

Brocade Network Advisor SAN + IP User Manual 131
53-1002949-01
Host discovery
4
Deleting IP devices from discovery
To delete one or more IP devices from discovery, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Select the IP devices you want to remove from discovery in the Discovered Products table.
Select multiple devices by holding down the CTRL key and clicking more than one device.
NOTE
You cannot delete an active member from a VCS fabric.
3. Click Delete.
Host discovery
The Management application enables you to discover individual hosts, import a group of Host from
a comma separated values (CSV) file, or import all hosts from discovered fabrics or VM managers.
NOTE
Host discovery requires HCM Agent 2.0 or later.
NOTE
SMI and WMI discovery are not supported.
Discovering Hosts by Network address or host name
To discover a Host by Network address or host name, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.