Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 1508
Brocade Network Advisor SAN + IP User Manual
1461
53-1002949-01
SAN performance overview
43
•
Tx MB/Sec — Available for FC, GE, managed HBA ports, managed CNA ports, 10GE ports,
E_port trunks, FCIP tunnels, and end-to-end monitors.
•
Rx MB/Sec — Available for FC, GE, managed HBA ports, managed CNA ports, 10GE ports,
E_port trunks, FCIP tunnels, and end-to-end monitors.
•
CRC Errors — Available for FC, managed HBA ports, managed CNA ports, 10GE ports and
end-to-end monitors.
•
Signal Losses — Available for managed HBA ports, managed CNA ports, and FC ports.
•
Sync Losses — Available for managed HBA ports, managed CNA ports, and FC ports.
•
Link Failures — Available for managed HBA ports, managed CNA ports, and FC ports.
•
Sequence Errors — Available for FC ports.
•
Invalid Transmissions — Available for FC ports.
•
Rx Link Resets — Available for FC ports.
•
Tx Link Resets — Available for FC ports.
•
C3 Discard — Available for FC ports.
•
C3 Discard RX Timeout — Available for FC ports
•
C3 Discard Tx Timeout — Available for FC ports
•
C3 Discard Unreachable — Available for FC ports.
•
C3 Discard Others — Available for FC ports.
•
Encode Error out — Available for FC ports.
•
Dropped Packets — Available for FCIP tunnels only.
•
Compression Ratio — Available for FCIP tunnels only.
•
Latency — Available for FCIP tunnels only.
•
Link Retransmits — Available for FCIP tunnels only.
•
Timeout Retransmits — Available for FCIP tunnels only.
•
Fast Retransmits — Available for FCIP tunnels only.
•
Duplicate Ack Received — Available for FCIP tunnels only.
•
Window Size RTT — Available for FCIP tunnels only.
•
TCP Out of Order Segments — Available for FCIP tunnels only.
•
Slow Start Status — Available for FCIP tunnels only.
•
Uncompressed Tx/Rx MB/sec - Available for FCIP tunnels only.
•
Overflow Errors — Available for 10GE ports only.
•
Runtime Errors — Available for 10GE ports only.
•
Receive EOF — Available for 10GE ports only.
•
Too Long Errors — Available for 10GE ports only.
•
Underflow Errors — Available for 10GE ports only.
•
Alignment Errors — Available for 10GE ports only.
•
NOS Count — Available for managed HBA ports and managed CNA ports.
•
Error Frames — Available for managed HBA ports and managed CNA ports.
•
Under Sized Frames — Available for managed HBA ports and managed CNA ports.
•
Over Sized Frames — Available for managed HBA ports and managed CNA ports.