Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1293)

1242 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Schedule backup
32
1. Click the IP tab.
2. Select Configure > Configuration > Schedule Backup.
The Schedule Backup dialog box displays, as shown in Figure 534 .
FIGURE 534 Schedule Backup dialog box
3. Select a backup configuration from the Backup Scheduler list.
4. Click the Edit button.
The Edit Automatic Configuration Backup dialog box displays, as shown in Figure 535 .
FIGURE 535 Edit Automatic Configuration Backup dialog box
5. Enter the following information:
• Frequency - The interval at which scheduled tasks are to run. The following schedule types
are available:
• One Time
• Hourly
• Daily
• Weekly
• Monthly
• Yearly
• Time (hh:mm) - The time of day to run the backup. Options include hour, minute, and AM or
PM.
• Minutes past the hour - For hourly backups, select the number of minutes past the hour
from the list.
• Day of the week - If you selected Weekly as the frequency type, select the day from the list.
• Day of the month - If you selected Monthly as the frequency type, select the day of the
month from the list.