Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1354)

Brocade Network Advisor SAN + IP User Manual 1305
53-1002949-01
Port VLANs
36
FIGURE 557 VLAN Manager dialog box - Product View tab
2. Expand a product to display the port VLANs that have been configured on that product.
3. Click a VLAN in the list to display the interfaces on that product that belong to the VLAN.
Port VLANs
VLAN Manager facilitates the creation, modification, and deletion of port VLANs on products that
are known to the Management application. It also aids in the bulk deployment of these VLANs. For
example, VLAN 3 can be configured on four products. If the VLAN definition for VLAN 3 is modified,
the new definition can be deployed to all four products at one time.
The Configure Port VLAN function in VLAN Manager allows you to define a port VLAN definition that
adds a new VLAN to a product or modify an existing port VLAN on a product. The port VLANs can be
designated as tagged, untagged, or converged.
Adding or modifying port VLANs
To create or modify port VLANs, complete the following steps.
1. On the VLAN Manager dialog box, click the VLAN View or Product View tab to enable the Add
button.
2. Click Add to add port VLANs or click Edit to modify existing port VLANs.
The Ports tab of the Add VLAN dialog box, shown in Figure 558 , displays.