Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1771)

Brocade Network Advisor SAN + IP User Manual 1729
53-1002949-01
Syslogs
48
The Management application removes the recipient from the managed switches.
Syslog forwarding
The Syslog Forwarding dialog box enables the Management application to forward syslog events to
a destination on another host. You can use the Syslog Forwarding feature to set up filters to
determine which syslog events will be forwarded.
Adding a syslog forwarding destination
The Add Syslog Destination dialog box allows you to configure destinations for forwarding syslog
events.
To add a syslog destination, complete the following steps.
1. Select Monitor > Syslog Configuration > Syslog Forwarding.
The Syslog Forwarding dialog box, shown in Figure 743 , displays.
FIGURE 743 Syslog Forwarding dialog box
2. Select the Enable syslog forwarding check box.
3. Click Add.
The Add Syslog Destination dialog box, shown in Figure 744 , displays. The Enable and Syslog
Repeater check boxes are selected by default.