Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 801)

744 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Policy-based routing
21
16. Click OK on the Product_Name PBR Configuration dialog box.
The Deploy to Products - PBR dialog box displays. To deploy the PBR policy, refer to “Deploying
a PBR policy on demand” on page 745, “Saving a PBR policy deployment” on page 746, or
“Scheduling a PBR policy deployment” on page 747.
Adding policies from saved configurations
1. Select an Ethernet router, Ethernet core router, or Ehternet Backbone router product and select
Configure > Policy Based Routing.
The Product_Name PBR Configuration dialog box displays.
2. Select Add > From Saved Configurations.
The PBR Saved Configurations dialog box displays.
3. Select the configuration you want to add from the list and click OK.
4. Click OK on the Product_Name PBR Configuration dialog box.
The Deploy to Products - PBR dialog box displays. To deploy the PBR policy, refer to “Deploying
a PBR policy on demand” on page 745, “Saving a PBR policy deployment” on page 746, or
“Scheduling a PBR policy deployment” on page 747.
Editing a policy
1. Select an Ethernet router, Ethernet core router, or Ehternet Backbone router product and select
Configure > Policy Based Routing.
The Product_Name PBR Configuration dialog box displays.
2. Select a policy in the Policy and Rules table and click Edit.
The PBR Policy Configuration dialog box displays.
3. Enter a name for the policy and click OK.
4. To add one or more rules to the policy, refer to “Adding rules to a policy” on page 742.
5. To edit a rule in the policy, refer to “Editing a rule” on page 744.
6. To delete a rule in the policy, refer to “Deleting a policy or rule” on page 745.
7. Click OK on the Product_Name PBR Configuration dialog box.
The Deploy to Products - PBR dialog box displays. To deploy the PBR policy, refer to “Deploying
a PBR policy on demand” on page 745, “Saving a PBR policy deployment” on page 746, or
“Scheduling a PBR policy deployment” on page 747.
Editing a rule
1. Select an Ethernet router, Ethernet core router, or Ehternet Backbone router product and select
Configure > Policy Based Routing.
The Product_Name PBR Configuration dialog box displays.
2. Select a rule in the Policy and Rules table and click Edit.
The Edit Rule - Rule_Name dialog box displays.