Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1114)

Brocade Network Advisor SAN + IP User Manual 1061
53-1002949-01
Zoning configuration
26
Adding zones to a zone configuration
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Select one or more zone configurations to which you want to add zones in the Zone
Configurations list. (Press SHIFT or CTRL and click each zone configuration name to select
more than one zone configuration.)
5. Select one or more zones to add to the zone configurations in the Zones list. (Press SHIFT or
CTRL and click each zone name to select more than one zone.)
6. Click the right arrow between the Zones list and the Zone Configurations list to add the zones
to the zone configurations.
7. Click OK or Apply to save your changes.
Any zones or zone configurations you have changed are saved in the zone database.
Removing a zone from a zone configuration
Use the following procedure to remove a zone from a zone configuration. Note that the zone is not
deleted; it is only removed from the zone configuration.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Click the plus sign (+) by the appropriate zone configuration in the Zone Configurations list to
expand the listing and show the zone configuration members.
5. Perform one of the following actions:
• Right-click the name of the zone you want to remove in the Zone Configurations list and
select Remove.
• To remove multiple zones, select the zones to be removed from the zone configuration,
and click the left arrow between the Zones list and the Zone Configurations list.
When successful, the zone is removed from the Zone Configurations list.
6. Click OK or Apply to save your changes.
Any zones or zone configurations you have changed are saved in the zone database.