Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1697)

Brocade Network Advisor SAN + IP User Manual 1653
53-1002949-01
PoE thresholds
46
FIGURE 719 Thresholds dialog box
3. Choose one of the following measures:
• Port allocation
• Port consumption
• Port consumption %
4. Select one of the following from the Conditions list:
• >
• <
• ==
5. Enter the number of events that must be generated to trigger the threshold event in the Value
field.
The value should not exceed the capacity of the product.
If you select a percentage measure, the value should be less than or equal to 100.
6. Select the severity level for the threshold event from the Severity list.
• Info
• Warning
• Critical