Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1245)

1194 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Changing the Allow/Prohibit Matrix display
30
Changing the Allow/Prohibit Matrix display
You can modify the matrix display on the Configure Allow/Prohibit Matrix dialog box using the
Window Arrangement list above the matrix display or the Clear all port names option below the
display.
Changing window arrangement
There are three options for the Allow/Prohibit Matrix display on the Configure Allow/Prohibit Matrix
dialog box located in the Window Arrangement list above the display.
• The matrix definitions may be cascaded (this is the default view).
• The matrix definitions may be tiled horizontally.
• The matrix definitions may be tiled vertically.
Perform the following steps to change the display to the desired format.
1. Select Configure > Allow/Prohibit Matrix.
The Configure Allow/Prohibit Matrix dialog box displays.
2. Select Cascade, Tile Horizontally, or Tile Vertically from the Window Arrangement list.
Clearing port names
Use the following steps to clear all port names from the selected matrix.
1. Select Clear Port Names below the matrix display.
A warning displays asking you to confirm the operation.
2. Select Yes to clear all port names from the matrix or select No to cancel the operation.
Cascaded FICON fabric
NOTE
You must have FICON Management privileges to configure a fabric for cascaded FICON.
The Management application enables you to easily configure a fabric for cascaded FICON. Note
that configuring a fabric for cascaded FICON may be disruptive to current I/O operations in the
fabric, as this involves disabling and enabling the switches in the fabric.
FICON configuration performs the following operations on the selected fabric:
• Turns on the insistent domain ID flag (IDID) on all switches.
• Sets High Integrity Fabric Configuration (HIFC) on the seed switch.
- Fabric-wide consistency policy (FWCP) is configured to include SCC in strict mode.
- SCC policy is created or modified to limit connectivity to only the switches in the selected
fabric.
• Enables port-based routing on all switches.
• Enables In-Order Delivery (IOD) on all switches.