Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1683)

Brocade Network Advisor SAN + IP User Manual 1639
53-1002949-01
PoE power on demand
46
Configuring automatic data refresh
To configure automatic refresh the PoE data, complete the following steps.
1. Select Monitor > Power Center.
The Power Center dialog box displays.
2. Select the Auto refresh check box to refresh the data automatically at a specified interval.
3. Select the auto refresh interval from the Interval (min) list.
Options include: 15, 30, or 60.
4. Click Close to close the Power Center dialog box.
PoE power on demand
You can use the Management application to power up on one or more PoE-capable ports on
demand or in a deployment schedule. If you need to periodically power up PoE-capable ports at
specific time, you can define a deployment schedule.
Powering up PoE-capable ports on demand
To immediately power up on one or more PoE- capable ports, complete the following steps.
1. Select Monitor > Power Center.
The Power Center dialog box displays.
2. Select PoE Products from the View list.
FIGURE 715 Power Center dialog box