Deleting conditions and blocks, Predefined blocks – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 1743
1700
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Configuration rules
47
Deleting conditions and blocks
You can only delete user-defined conditions or blocks. Before you delete a user-defined condition or
block, you must remove it from any rules.
1. From the Add Configuration Rule or Edit Configuration Rule dialog box, select one or more
user-defined conditions or blocks you want to delete.
2. Click Delete.
3. Click Yes on the confirmation message.
4. Click OK on the Add Configuration Rule or Edit Configuration Rule dialog box.
Predefined blocks
The Management application provides predefined blocks.
lists the predefined blocks that can be used in a configuration rule.
TABLE 168
Predefined blocks
Name
Description
Use
regular
expression
Block Start
Block End
Network OS TenGigabit Ethernet
Interfaces
Processes all 10 Gigabit Ethernet
Interfaces on a Network OS device.
Yes
interface TenGigabitEthernet .* !
Network OS Gigabit Ethernet
Interfaces
Processes all Gigabit Ethernet
Interfaces on a Network OS device.
Yes
interface GigabitEthernet .*
!
Network OS Vlan Interfaces
Processes all VLAN Interfaces on a
Network OS device.
Yes
interface Vlan .*
!
Network OS LAG Interfaces
Processes all LAG Interfaces on a
Network OS device.
Yes
interface Port-channel .*
!
Network OS Protocol LLDP
Processes the protocol LLDP block.
No
protocol lldp
!
IronWare OS Ethernet Interfaces
Processes all Ethernet ports on the
IronWare device.
Yes
interface ethernet .*
!
IronWare OS VLAN Interface
Processes VLANs on the IronWare
device.
Yes
vlan .*
!
RFS AAA Policies
Processes all the AAA policies
available for the RFS device.
Yes
aaa-policy.*
!
RFS Profile
Processes all the profiles available for
RFS device.
Yes
profile.*
!