Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1816)

1774 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Event logs
48
Displaying event properties from the Master Log
You can view detailed information for an event.
NOTE
Network OS events display in both the SAN and IP tab of the Master Log.
To display event details from the Master Log, complete the following steps.
1. Right-click an entry in the Master Log.
2. Select Properties.
The Event Properties dialog box, shown in Table 170 , displays.
3. Review the information.
TABLE 170 Event Properties
Event Field Description
Probable Cause The most likely reason the event occurred.
Description A description of the event.
Count Number of times this event occurred on the host.
Origin The event’s origin, for example, SNMP trap.
Message ID The message associated with the event.
Port Name The port name associated with the event.
First Event Server Time The time the event occurred.
Fabric Name The VCS fabric name.
Product Address The IP address of the product on which the event occurred.
Audit Information regarding the audit.
Category One of the following event categories, which are detailed in “Event Categories”
on page 1929:
•
Product Event
•
Link Incident Event
•
Product Audit Event
•
Product Status Event
•
Security Event
•
User Action Event
•
Management Server Event
Last Event Product Time The day, date, and time the last event occurred on the product.
Last Event Server Time The day, date, and time the last event occurred on the server.
Severity The event severity.
Source Name The source of the event.
Virtual Fabric ID The virtual fabric identifier.
Contributor The contributor to this event.
Recommended Action The recommended action to take to remedy the event.
First Event Product Time The day, date, and time the first event occurred on the product.
Operational Status The product’s operational status.