Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1731)

1688 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Configuration rules
47
10. Click OK on the Add Monitor dialog box.
The updated policy monitor displays in the Monitors table of the Policy Monitor dialog box.
11. Click Close on the Policy Monitor dialog box.
Editing a configuration rule
You can edit your own rules to compare content against a baseline.
1. Select Monitor > Policy Monitor.
The Policy Monitor dialog box displays.
2. Click Edit.
The Edit Monitor dialog box displays.
3. Click the Switch/Router Checks tab.
4. Select the configuration rule you want to edit in the Available Checks list and click Edit.
The Edit Configuration Rule dialog box displays.
5. Change the name for the rule in the Name field.
The name cannot be over 128 characters. The only special characters allowed are an
underscore (_) or space.
6. Change the description for the rule in the Description field.
The description cannot be over 1024 ASCII characters.
7. To edit a configuration rule, repeat step 7 through step 15 of “Adding a configuration rule” on
page 1685.
8. Click OK on the Edit Configuration Rule dialog box.
9. Click OK on the Edit Monitor dialog box.
The updated policy monitor displays in the Monitors table of the Policy Monitor dialog box.
10. Click Close on the Policy Monitor dialog box.
Exporting a configuration rule
You can export user-defined configuration rules from one instance of the Management application
to another.
1. From the Add Monitor or Edit Monitor dialog box, select Export from the Export list.
The Export Configuration Rule dialog box displays.
2. Browse to the location where you want to export the configuration rule (xml format) file and
click Export.
3. Click OK on the Add Monitor or Edit Monitor dialog box.