Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1715)

1672 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Viewing existing policy monitors
47
Viewing existing policy monitors
To view existing policy monitors, complete the following steps.
1. Select Monitor > Policy Monitor ( Figure 722 ).
The Policy Monitor dialog box displays.
FIGURE 722 Policy Monitor dialog box
2. Review the policy monitor details:
• Name — The user-defined name of the policy.
• Description — A description of the policy.
• Alert — Select to receive e-mail alerts and have the policy monitor status icon display in the
Status bar when the monitor fails or partially fails.
• Frequency — The frequency (one time, hourly, daily, weekly, or monthly) at which the policy
is scheduled.
• Next Run — The time the policy will run again.
• Last Run — The time the policy ran last.
• Result — The result of last policy monitor run. There are four possible results: Passed,
Partially Failed, Failed, and Not Applicable.
• Acknowledged — Whether the policy is acknowledged or not. Select the check box to
acknowledge the policy. Disabled when the associated Alert check box is cleared.
3. To add a policy monitor, click Add (refer to “Adding a policy monitor” on page 1673).
4. To edit the selected policy monitor, click Edit (refer to “Editing a policy monitor” on page 1680).
5. To delete the selected policy monitor, click Delete (refer to “Deleting a policy monitor” on
page 1681).
6. To run the selected policy and view the report, click Run (refer to “Running a policy monitor” on
page 1701).