Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1868)

Brocade Network Advisor SAN + IP User Manual 1827
53-1002949-01
MAPS violations
50
MAPS violations
MAPS violation data is stored in the database for 30 days. The system purges old data (over 30
days) every night at 12:00 AM. The system also purges violations from deleted or unmonitored
devices.
Viewing MAPS violations
1. Right-click a device in the Product List or Connectivity Map and select Fabric Vision > MAPS >
Violations.
The Violations dialog box displays ( Figure 778 ).
FIGURE 778 Violations dialog box
2. Display data for a specific duration by selecting one of the following options from the Range
list:
• 30 Minutes (default) — Displays data for the previous half hour beginning when the
Violations dialog box is displayed.
• 1 Hour — Displays data for the previous hour beginning when the Violations dialog box is
displayed.
• 6 Hours — Displays data for the previous 6 hours beginning when the Violations dialog box
is displayed.
• 12 Hours — Displays data for the previous 12 hours beginning when the Violations dialog
box is displayed.
• 1 Day — Displays data for the previous day beginning when the Violations dialog box is
displayed.
• 3 Days — Displays data for the previous 3 days beginning when the Violations dialog box is
displayed.
• 1 Week — Displays data for the previous week beginning when the Violations dialog box is
displayed.
• 1 Month — Displays data for the previous month beginning when the Violations dialog box
is displayed.