Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2132)

Brocade Network Advisor SAN + IP User Manual 2095
53-1002949-01
Database tables and fields
I
ENABLED Is circuit enabled. Default: 0,
Values: 0|1.
The default value is 0. smallint
MISMATCHED_CONFIGURATIONS If a tunnel is down due to
mismatched configurations
on local and remote end, this
property specifies the list of
such mismatched
configurations. varchar 1024
CIRCUIT_STATUS_STRING Circuit Status string value
from switch for the tunnel varchar 256
L2COS_F_CLASS The default value is 0. smallint
L2_COS_HIGH The default value is 0. smallint
L2_COS_MEDIUM The default value is 0. smallint
L2_COS_LOW The default value is 0. smallint
DSCP_F_CLASS The default value is 0. smallint
DSCP_HIGH The default value is 0. smallint
DSCP_MEDIUM The default value is 0. smallint
DSCP_LOW The default value is 0. smallint
FAILOVER_CIRCUIT Whether the circuit is
configured as failover or not. smallint
FAILOVER_GROUP_ID Represents the failover group
id for the circuit
0 - Default Failover Group.
1 - 9 Failover Group numbers
for the circuits.
-1 - Not supported. For the
switches running less than
FOS 7.2. int
TABLE 203 FCIP_TUNNEL_PERFORMANCE
Field Definition Format Size
TUNNEL_ID Primary key of the Switch Port int
SWITCH_ID The number of octets or bytes that have been
transmitted by this port. One second periodic polling
of the port. This value is saved and compared with the
next polled value to compute net throughput. Note, for
Fibre Channel, ordered sets are not included in the
count int
TX 'The number of octets or bytes that have been
transmitted by this port. One second periodic polling
of the port. This value is saved and compared with the
next polled value to compute net throughput. Note, for
Fibre Channel, ordered sets are not included in the
count double
precision
TABLE 202 FCIP_TUNNEL_CIRCUIT (Continued)
Field Definition Format Size